The newest addition to the JET Bandsaw lineup, the JET 14” SFX Steel Frame Bandsaw redefines the line between functionality and affordability. The large, cast iron table features 360 sq. in. of work surface for greater work piece support when making deep cuts. The machined aluminum fence system features easily visible measurements for the most accurate cutting. This saw is equipped with JET’s easily adjustable blade guide system, makes adjustments quick and simple. The JET 14” Bandsaw also features over 13 inches of re-saw capacity, and dual 4 inch dust ports for maximum dust collection efficiency. Heavy duty tubular steel welded construction, robust stamped steel doors with welded steel pin hinges, and heavy duty base, allows for stability and durability when sawing large work pieces. The JET 14” SFX Bandsaw provides the woodworker all the premium features of a higher end saw with superior performance to complete any project.
Features:
- Blade tensioning wheel located on top of the saw for better work piece clearance when cutting
- Convenient 115V AC outlet location for optional accessories
- Deeper table with a massive 360 sq. in. of cast iron work surface for greater work piece support
- Engineered diecast and steel trunnion system, allows for single point adjustments when moving table
- Independently adjustable, upper and lower ball bearing blade guides
- Oversized lower bearing bolt pattern for maximum strength and rigidity
Specifications:
- Model Number: JWBS-14SFX
- Stock Number: 714400K
Motor and Electricals:
- Motor Type: Totally-enclosed fan-cooled induction, capacitor run
- Horsepower: 1.75 HP (1.3 kW)
- Motor Phase: 1
- Motor Voltage: 115/230 V (prewired 115 V)
- Cycle: 60 Hz
- Listed FLA (Full Load Amps): 15 / 7.5A
- Start Capacitor: 100uF 275VAC
- Run Capacitor: 40uF 450VAC
- Motor Speed: 1720 RPM
- Starting Current: 63 / 34 A
- Running Current (No load): 5.8 / 3.6 A
- Power Transfer: V-belt
- On/off Switch: Industrial-style push button
- Power Cord and Plug: SJT 14AWGx3C, 6ft., 5-15P plug
- Recommended Circuit Size: 1 20A (for 115V), 15A (for 230V)
- Sound Emission Without Load: 2 75 dB at 3 ft. (900mm) from blade
Capacities and Speeds:
- Band Saw Nominal Size: 14 in. (355 mm)
- Wheel Diameter: 14 in. (355 mm)
- Re-saw Capacity (cutting height): 13 in. (330 mm)
- Throat Capacity: 13-1/2 in. (345 mm)
- Blade Length (Blade NOT Provided): 116 in. (2947 mm)
- Minimum Blade Width: 1/8 in. (3.175 mm)
- Maximum Blade Width: 3/4 in. (19 mm)
- Blade Speed: 15.24 m/s (3000 FPM)
- Wheel Speed: 765 RPM
Main Materials:
- Table Ground: Cast iron
- Table Insert: Anodized aluminum
- Trunnion: Cast iron
- Frame: Steel
- Stand: Steel
- Band Wheels: Cast iron
- Tires: Polyurethane
- Blade Guides: Ball bearings, aluminum block
- Re-saw Fence: Extruded aluminum
- Paint Finish: Powder coating
- Door Knobs: Plastic
Dust Collection:
- Dust Port Outside Diameter: 4 in. (100mm)
- Minimum Extraction Volume Required: 400 CFM
Table and Fence:
- Table Dimensions L x W: 21-1/2 x 17 in. (535 x 435 mm)
- Table Tilt: 0 to 45° Right
- Table Height from Floor: 40 in. (1020 mm)
- Miter T-Slot (2), W x D: 3/4 x 13/32 in. (19 x 10 mm)
- Re-saw Fence Size L x H: 18-1/4 x 6 in. (463 x 155 mm)
General Dimensions:
- Overall Dimensions, Assembled L x W x H (Approx.): 37 x 27-1/2 x 75-3/8 in. (940 x 700 x 1915 mm)
- Shipping Dimensions L x W x H (Approx.): 63 x 27 x 20 in. (1600 x 685 x 510 mm)
- Base (Footprint) L x W: 24.8 x 17-3/4 in. (630 x 450 mm)
Weights:
- Net Weight (Approx.): 272 lb. (122 kg)
- Shipping Weight (Approx.): 316 lb. (142 kg)
