Designed to perform, the JET 15” bandsaw delivers more re-saw capacity, greater throat depth and the horsepower you need to tackle bigger boards, create smoother edges and master the intricate cuts. The heavy-duty cast-iron fence system is built to give you the sturdiness and support you need for every project and features a micro-adjust dial for exact placement. The table is slotted to allow for front blade removal and the guide post has a stress-free magnetic door on the front for efficient blade changes. Large, independently adjustable guides are tool-less to save you time on set up. The JET 15” steel frame bandsaw is engineered to build great projects through superior performance.
Features:
- Blade tracking window provides clear view of blade during tracking
- Cast iron handwheels and ergonomic-designed knobs make adjustments smooth and easy
- Cast iron trunnion for maximum support and stability
- Conveniently located dual 4″ dust collection ports catch dust and chips at the source
- Easy-to-read blade tension scale can be viewed through upper door window
- Heavy duty tensioning with quick release and three settings: full tension, partial tension, and full release
- Rigid, four-sided guide post with rack and pinion adjustment for optimum blade support
- Round table insert features leveling screws for precise adjustment
- Single knob adjustment simplifies the blade tracking process
- Table tilts 5° left and 45° right to accommodate a wide variety of cuts
Specifications:
- Model Number: JWBS-15
- Stock Number: 714600
- Band Saw Nominal Size: 15 in.
Motor and Electricals:
- Motor Type: Totally-enclosed fan-cooled, induction, capacitor start
- Horsepower: 1.75 HP
- Phase: Single
- Voltage: 115/230V (prewired 115V)
- Cycle: 60Hz
- Listed FLA (Full Load Amps): 15/7.5A
- Starting Amps: 75A
- Running Amps (No Load): 5.1A
- Start Capacitor: 300MFD 250VAC
- Run Capacitor: 40μF 250VAC
- Power Transfer: Poly v-belt
- On/off Switch: Push button with paddle stop
- Motor Speed: 1720 RPM
- Power Cord Length: 6 ft. (183 cm)
- Power Plug Installed: 115V
- Recommended Circuit Size: 20A
- Sound Emission: 75 dB at 40” (1000mm) from blade, without load
Capacities & Speeds:
- Wheel Diameter: 14-3/4 in. (375 mm)
- Re-saw Capacity (Cutting Height): 14 in. (356 mm)
- Throat Capacity: 14-1/8 in. (359 mm)
- Maximum Rip Left of Blade with Fence: 12-3/8 in. (316 mm)
- Maximum Rip Right of Blade with Fence: 2-7/8 in. (73 mm)
- Blade Length: 133 in. (min. 131.8; max. 133.5)
- Minimum Blade Width: 1/8 in
- Maximum Blade Width: 1 in
- Blade Speed: 3100 FPM
- Blade Provided: Hook, 1/2″ x 0.0256 thk 6 TPI
Main Materials:
- Table: Ground cast iron
- Trunnion: Cast iron
- Frame: Steel
- Band Wheels: Cast iron
- Tires: Yellow polyurethane
- Blade Guides: Ball bearing
- Re-saw Fence: Extruded aluminum
- Paint Finish: Powder coating
Table, Fence, Miter Gauge:
- Table Dimensions: 21-1/2 x 16 x 2 in. (546 x 406 x 51 mm)
- Table Tilt: Left 5°, Right 45°
- Table Height from Floor: 35 in. (889 mm)
- Miter T-slot: 3/4 in. W x 0.35 in. H
- Re-saw Fence Size L x W x H: 18-1/8 x 1-3/4 x 6 in
- Miter Gauge Angle: Left 45°, Right 45°
- Fence Fine Adjust Knob, Travel Per One Revolution: 0.05 in. (1.25 mm)
- Fence Fine Adjust Knob, Maximum Travel: 0.35 in. (9 mm)
Dimensions:
- Footprint (Base Size), L x W x H: 25-1/2 x 21-5/8 x 2 in. (648 x 549 x 51 mm)
- Overall Dimensions, L x W x H: 29-1/2 x 32 x 74 in. (750 x 812 x 1880 mm)
- Shipping Package Dimensions: 30 x 24-1/2 x 79-1/2 in. (760 x 625 x 2020 mm)
Dust Collection:
- Dust Port Outside Diameter: 4 in. (100mm) x 2
- Minimum Extraction Volume Required: 400 CFM
Weights:
- Net: 382 lbs. (174 kg)
- Shipping: 446 lbs. (203 kg)
