Product Specifications
Furnish and install Heavy-Duty Forced Air wall heaters, where specified. The heaters
shall be constructed of a heavy 18 gauge steel housing with an extruded Aluminum
frame. The rough-in dimensions are 14-1/8″ Wide x 19-1/2″ High x 4″ Deep. The units
shall be available in ratings from 750 to 4800 Watts at 240, 208, and 277 Volts. The
heaters shall have a low-speed 600 RPM, 4-pole motor which drives a vane axial blower
to deliver a quiet 175 CFM of down flow air. The heating element shall be of the sealed tubular type with large, parallel steel fins for quick heat transfer. Unit shall have as a standard, a thermal overload cut-off for added safety, fan delay switch and built-in tamper proof thermostat which shall be calibrated to provide a range of 0°F. to 110°F. and manual disconnect switch. Optional accessories shall include a surface and semi-recess mounting adapter. All heaters shall be listed by ETL. The heating element shall be supplied with a manufactures 1-year limited warranty.
Features
- Disconnect switch
- Automatic fan delay circuit
- Automatic reset thermal limit
- Powder coated 18 gauge steel grill with extruded Aluminum front frame
- Steel block fin element
- Vane axial fan blade: 600 RPM motor; 175 CFM
- Rough-in dimensions: 14-1/3″ Wide x 19-1/2″ High x 4″ Deep
- Grill dimensions: 15 29/32″ Wide x 20 27/32″ High
- Built-In tamper proof thermostat
- Made in U.S.A