Centrifugal-Separators

JL W Centrifugal Separators

Centrifugal Separators

JL W Centrifugal Separators

$0.01

In stock
Item # LF-JLWCS

$0.01

SKU: LF-JLWCS
  • Description
  • Additional information

Description

The power of centrifugal force has been used to separate solids from liquids for over a century. Centrifugal separators are designed to take full advantage of this technology, while acting as a highly efficient solid-liquid separation tool.

Centrifugal Separators have no screens, slotted baffles, moving parts or filter media to cause unnecessary pressure loss or use of large volumes of backwash water. No maintenance is required, however, a periodic opening of the purge valve is necessary to dispose of unwanted solids.

Click on a model number below to have a filtration specialist tell you more about these solid-liquid separators.

Download – Centrifugal Separators Brochure

How They Work

The system’s influent passes through the separator in a high-velocity circular motion.

Centrifugal force slings the particulates, sand, debris, and sludge outward to the separator wall and downward in a spiral motion. Gravitational force pulls the separated solid particles downward past the spin trap plate into the solids holding chamber.

The cleansed effluent then rises through the vortex locator and returns back to the system.

Purging can be done manually or automatically through the use of a purge package. The lack of moving parts means there is little to no maintenance required.

Available Models

Model Sizes Weight End Connection Pressure Temperature Spec Sheet
XTI-1 3″ 51 lbs Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XTI-2 1/2″ to 2-1/2″ 11 – 32 lbs Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XGD-1 3″ 53 lbs Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XGD-2 1/2″ to 2-1/2″ 11 – 34 lbs Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XFT-1 3″ 70 lbs Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XFT-2 1/2″ to 2-1/2″ 13 – 49 lbs Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XFD-1 4″ to 20″ 159 – 2464 lbs Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
RTE-1 3″ 198 lbs Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
RTE-2 1/2″ to 2-1/2″ 57 – 133 lbs Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
RFR-1 4″ to 20″ 220 – 3036 lbs Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
RFL-1 3″ 222 lbs Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
RFL-2 1/2″ to 2-1/2″ 59 – 149 lbs Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF

Features:

  • Flow rates from 8 – 13,000 GPM
  • Model sizes ranging from 1/2″ – 20″
  • 150 psi at 200° F max (1055 kPa at 93° C), higher ratings available
  • 150 lb. ANSI RF/SO flanged or National Pipe Thread, others available upon request
  • Carbon steel or stainless steel, consult factory for other requirements
  • No routine maintenance or parts replacement, simple periodic solids purging only
  • Up to 80% less space required than conventional filtration equipment
  • Selection, sizing, custom designs and systems and installation guidance available
  • Options include:
    • Space saving designs
    • High temperature and pressure
    • Special coatings
    • Low profile (4″ – 20″ models)
    • Wall mounting brackets (1/2″ – 3″ models)
    • Removable legs (1/2″ – 3″ models)
    • Clean-out (4″ x 6″ door / 2″ FNPT plug)
    • Internal inspection access
    • Removable purge chamber
    • Automatic, manual & continuous purge packages

Performance

Centrifugal Separators can remove up to 98% of the particles which are 363 mesh / 40 microns, and 1.8 specific gravity or greater. Particles with less than 1.8 specific gravity and smaller than 40 microns may be removed with greater effectiveness from liquids with a specific gravity less than water.

Solid/Liquid Criteria Range

Particle Size > 40 micron up to 1 3/4″, consult factory for other requirements
Pressure Drop Minimum 4 psi with little to no fluctuations
Flow Range 8 gpm to 13,953 gpm – higher & variable flow rates possible through manifolding
Fluid Loss Minimal fluid loss achieved with a continuous recovery system

 

 

Additional information

Weight 1 lbs
Quick Quote
Or call (866) 487-8048 for immediate help.
Quick Quote
Chat