Gorman-Rupp, Self Priming Centrifugal 1 1/2×1 1/2 NPT 60 PSI-81 1/2A52-B

Heavy-Duty Self-Priming Centrifugal Pumps

Gorman-Rupp 80 Series® medium head, mild solids-handling, self-priming centrifugal pumps are designed for non-stop work loads.

The straight-in-suction design of these high efficiency pumps guarantees quick positive priming and allows them to operate at higher suction levels than most other self-priming centrifugal pumps.

The liquid being pumped enters directly into the eye of the impeller, and a suction check valve prevents in-line return flow when the pump is shut off. And, because they have few moving parts, 80 Series pumps are easy to maintain and service, saving money in the long run.

80 Series self-priming centrifugal pumps are available in a variety of configurations for all of your industrial, construction, mining, agricultural, municipal and petroleum fluid handling needs.

Specifications:

• Size: 1 1/2” x 1 1/2” (38 mm x 38 mm) NPT – female.
• Casing: Gray iron 30.
• Maximum Operating Pressure: 60 psi (414 kPa).
• Semi-Open Type, Three Vane Impeller: Ductile iron 65-45-12. Handles 5/8” (15.8 mm) diameter spherical solids.
• Impeller Shaft: Carbon steel 1215.
• Replaceable Wear Plate: Carbon steel 1026.
• Pedestal: Gray iron 30.
• Seal Plate: Gray iron 30.
• Shaft Sleeve: Stainless steel 304.
• Flap Valve: Buna-n, steel and gray iron 30.
• Radial and Thrust Bearings: Open single row ball.
• Bearing Lubrication: Grease.
• Suction Flange: Gray iron 30.
• Gaskets: Cork.
• Hardware: Standard plated steel and stainless steel.
• Discharge Service Tee: Ductile iron.

Downloads:

Spec Sheet
Operations Manual