The pocket size CSG Current and Voltage Signal Generator is an ideal tool for troubleshooting transmitters, transducers, motors, and actuators. The unit generates a 0 to 10 VDC signal in increments of 1 volt or a 0 to 20 mA signal in increments of 1 mA.
The Model CSG features a large LCD display with a blue backlight for use in dimly lit areas. The CSG continuously ramps the output using user selected minimum, maximum, and ramp interval timing parameters.
Units are furnished with a battery, 120 VAC plug-in power supply, test leads with alligator clips, carrying case, and instruction manual.
Impedance
Voltage: 1000 ohm min.; Current: 300 ohm max.
Output:
0 to 20 mA (1 mA increments); 0 to 10 VDC (1 VDC increments).
Resolution:
1 mA (current); 1 VDC (voltage).
Ramping time intervals:
1 to 20 sec (1 sec increments).
Ambient Operating Temperature:
32 to 122F (0 to 50C).
Power Requirements:
9 V alkaline battery, included, user replaceable or 120 VAC (provided).
Auto Power Off:
1 to 20 min.
Electrical Connections:
6 ft (1.8 m) with alligator clips.
