The Series 2500 Temperature Control provides an impressive array of features in an economical 1/4 DIN package. Features include on-off, time proportioning, proportional, PI, PD, or full PID control, programmable from the front panel, or use Self-Tune PID.
Input types are selectable from a variety of thermocouple types (J, K, T, E, N or L) or DIN, NIST or Ni RTD ‘s. Outputs include solid state relay, mechanical relay, 5 VDC (ideal for driving an external SSR) or isolated 4-20 mA proportional current. Programmable alarm can act as high or low or high/low guard band alarm.
A water and corrosion resistant front panel (NEMA 4X; IP65), input fault timer, digital input filter, Self-Tune ramp to setpoint, four password protected security levels and deg-F or deg-C display selection are all standard. Entire electronics package is field replaceable without wiring changes thanks to removable front panel.
Features:
- Inputs: Thermocouple or RTD
- Input Impedance:
- Thermocouple = 3 megohms minimum
- RTD current = 200 micro-A maximum.
- Supply Voltage: 100-240 VAC nominal, +/- 10%, 50-400 Hz, single phase; 132-240 VDC nominal, +/-10%
- Power consumption: 5 VA maximum
- Memory backup: Non-volatile memory. No battery required.
- Control Action: Selectable for reverse (usually heating) or direct (usually cooling)
- Ramp: One ramp time adjustable from 0-100 hours
- Isolation: Relay and SSR outputs; 1500 VAC. 0-20 mA output; 500 VAC. 5 VDC output is not isolated
- Temp Rating: 14 – 131 F
- Display: LED
- Current Consumption: 5 VA Max
Control Output Ratings:
- SSR: 2.5A @ 240 VAC resistive at 77F, de-rates to 1.25A @ 130F;
- Relay: SPDT, 10 A @ 240 VAC resistive; Switched Voltage (non-isolated) 5 VDC @ 20 mA;
- Proportional Isolated Current: 0-20 mA, selectable, into 600 Ohms maximum.