The 1500 Series Temperature Controller is a reliable, accurate and fully programmable temperature control or alarm in an economical 1/16 DIN case. Microprocessor based, all control functions are easily programmed from the waterproof, corrosion resistant front panel.
Models are available that accept field selectable J, K, T, E or N type thermocouples or RTD 100 ohm DIN (.00385 ohms/ohm/C) inputs and provide SSR, Relay or 5 VDC Logic outputs.
All models are programmable for on-off, P, PI, manual PID or automatic Self-Tune PID control.
Like the control output, optional alarm is field configurable direct acting (cooling) or reverse acting (heating) and is easily adjusted for either automatic or manual reset to provide independent high or low system protection. Four security levels are password protected.
Features:
- Inputs: Thermocouple (J type stocked), field selectable K, T, E, or N type; RTD (100 ohm DIN)
- Supply Voltage: 100 to 240 VAC, 50 to 400 Hz. single phase; 132 to 240 VDC (nom.) +10% – 20%. 5 VA maximum power consumption
- Output Ratings:
- SSR: 3.5A @ 240 VAC max. @ 77° (25°C) typical
- Relay (SPST): 3A res., 1.5A ind. @ 250 VAC
- Pilot Duty = 250 VA, 2A @ 125 VAC or 1A @ 250 VAC
- Temperature Range:
- Operating 14 – 131 F
- Storage -40 – 176 F
- Isolation: Relay and SSR outputs are isolated
- Sensor break protection: De-energizes control output
- Display: LED
