SF200 Surface Frame for 2′ x 2′ Panels
Product Description
For Surface Or Recessed Installation, Radiant Ceiling Panels radiate
energy like the solar radiation which warms us, heats objects, not the
air. With no moving parts, these heating panels create gentle warmth and
toasty comfort.
Radiant Ceiling Panels provide a low surface temperature and broad heat
distribution. Clean, gentle comfortable heat that is ideal for offsetting
perimeter heat loss or neutralizing downdrafts over glass. These versatile
and flexible panels may be used virtually anywhere in homes, schools,
hospitals, motels and a broad variety of other commercial or
industrial installations.
Product Specifications
Construction:
Radiant Ceiling Panels shall be made of highest quality steel casing.
Front panel shall be painted with textured powder coated finish. Electric
Resistance element is fixed between dielectric material and insulation.
Two inches of insulation is compressed to one inch by back panel to
minimize upward heat loss and radiant efficiency. Radiant panels
shall have 36″ pre-wired flexible cable for easy installation and wiring
connections. CP Series is 20 Gauge metal. Made in U.S.A.
Installation:
CP Series shall be designated as 2×2 or 2×4 size. All panels are 1″
thick. The size shall be nominal dimension to be manufactured to fit
drop ceiling systems. Standard units will fit regular “T” Bar frame. For
regular or trim line or other frame sizes, special construction is required.
RCP Series shall be used in recess mounting applications. RCP Series
shall be 2″ less in width to recess between nominal 24″ center ceiling
joists. RCP Series shall be complete with recess frame for finished
construction
Accessories:
Surface mounting frames shall be optional for surface mounting the CP
Series, and are Aluminum mill finish. Frames can be painted white to
match panel.
Options
Silk-screening the exposed surface to match ceiling tiles is available, as
well as silicone sealed metal parts for high humidity applications
