Designed to accommodate inflexible high current cables, the BusBar Box can safely terminate conductors up to 3200 amps in harsh and hazardous locations.
A busbar is a crucial element of any efficient electrical power distribution system allowing for greater flexibility and reduced overall installation costs. Abtech’s BusBar Box allows this facility to be implemented with hazardous area locations, often to provide temporary power connection during construction and commissioning phases.
Suitable for connectors over 400mm, the enclosure can connect three-phase plus neutral supplied with up to six conductors per phase.
Manufactured from 316L (1.404) Stainless Steel, IP66 and Type 4X rated the BusBar Box is at home in any offshore marine or exposed onshore environment. In addition to the use of cable glands, cable integration can also be achieved via modular transit systems, whilst still maintaining the IP and Ex-rating.
- Up to 3200A
- Fault rated 90kA for 0.1 second
- DTS-01 deluge tested enclosure
- Heavy duty machined hinges with lift off cover pad-lockable cover
- Enclosure Type: High Voltage
- Maximum Voltage: 11kV
- Maximum Current: Up to 3000A standard, 3200A optional
- Ingress Protection: IP66 to EN60529, DTS-01
- Impact Resistance: >7Nm
- Material: 2mm 316L Stainless Steel (EN 1.4404) enclosure with orbital finish, silicone gasket and captive 316 stainless steel fasteners, 5mm 316L (EN 1.4404) Stainless Steel gland plates
- Crimp Lugs: 16mm to 800mm
- Earthing: Via studs on enclosure, door and gland plates
- Mounting: Via heavy duty 3mm thick external angle frames
- Area Classification: Zone 1 & 21, Gas and Dust / Class 1 Division 2 / InMetro
- Type of Protection: Ex e (Increased Safety), Ex tb (Dust Protected)
- Apparatus Coding: Ex e IIC T5/T6 Gb, Ex tb IIIC T65°C /T55°C Db
- Ambient Temp Rating: -40°C to +40°C T5/T6, -40°C to +60°C T6
- Certificate Number: ATEX: Sira 99ATEX3177 / IECEx: SIR 12.0155 / InMetro: TÜV 11.0322
Reviews
There are no reviews yet.