Home » Compressed Air Solutions » Compressed Air Filters » Eliminex High Flow Separators

Eliminex High Flow Separator Compressed Air Filters

Water & DirtEliminex High Flow Separator

Eliminex high flow separators rid the mainline of both water condensate and dirt particulates at 99.7% efficiency at 3.0 microns. By adding an Eliminex filter to your compressed air system, you will protect the entire line and effectively extend the life of all downstream equipment.

 

ISC is proud to offer the specially patented inverse flow filter-dryer with all stainless steel mesh filter packing that provides unparalleled water and dirt capture. The inverse flow process spins air rapidly as it flows vertically downward, changes direction and then begins to flow vertically upward. This reversal of air flow prevents the re-entrance of contaminants which normally occurs. 

Features:

  • Centrifugal Spinning: Water and dirt are spun outwards, gravity forces particles towards the drain
  • Inverse Flow: Prevents contaminants re-entering the system
  • Stainless Steel Element: The striated surface holds aerosols and liquid droplets, which then fall into the drain area
  • Final Filter Media: Composed of interwoven cotton, polyester and stainless steel this filter captures excess sub-micron water droplets
  • Bowl & Drain Options: Metal or Poly-carbonate bowl options, with either a manual, float or electronic drain.

Specifications

Port Sizes1/4”, 3/8”, 1/2”
Thread StylesNPT, BSPT, BSPP
Flow Capacity60 scfm @ 100 PSI
Filter Capacity3.0 Micron & larger
Differential Pressure< 1.5 PSID at rated flow
Max Temp/Pressure Aluminum Bowl175°F/200 PSIG
Max Temp/Pressure Polycarbonate Bowl125°F/150 PSIG
Approx. Weight (lb.)3.5

Ordering Guide

Port SizeMetal BowlPoly Bowl
Manual Brass Petcock1/4″1P-060-M02-P1P-060-P02-P
Manual Brass Petcock3/8″1P-060-M03-P1P-060-P03-P
Manual Brass Petcock1/2″1P-060-M04-P1P-060-P04-P
Automatic Float1/4″1P-060-M02-F1P-060-P02-F
Automatic Float3/8″1P-060-M03-F1P-060-P03-F
Automatic Float1/2″1P-060-M04-F1P-060-P04-F

Product Download

Download - 60 SCFM Spec Sheet

Specifications

Port Sizes1/2″, 3/4″, 1″
Thread StylesNPT, BSPT, BSPP
Flow Capacity120/175/250 scfm @ 100 PSI
Filter Capacity3.0 Micron & larger
Differential Pressure< 1.5 PSID at rated flow
Max Temp/Pressure Aluminum Bowl175°F/200 PSIG
Max Temp/Pressure Polycarbonate Bowl125°F/150 PSIG
Approx. Weight (lb.)6.0

Ordering Guide

Port SizeMetal BowlPoly Bowl
Low FlowMed FlowHigh FlowLow FlowMed FlowHigh Flow
Manual Brass Petcock1/2″1P-120-M04-P1P-175-M04-P1P-250-M04-P1P-120-P04-P1P-175-P04-P1P-250-P04-P
Manual Brass Petcock3/4″1P-120-M06-P1P-175-M06-P1P-250-M06-P1P-120-P06-P1P-175-P06-P1P-250-P06-P
Manual Brass Petcock1″1P-120-M08-P1P-175-M08-P1P-250-M08-P1P-120-P08-P1P-175-P08-P1P-250-P08-P
Automatic Float1/2″1P-120-M04-F1P-175-M04-F1P-250-M04-F1P-120-P04-F1P-175-P04-F1P-250-P04-F
Automatic Float3/4″1P-120-M06-F1P-175-M06-F1P-250-M06-F1P-120-P06-F1P-175-P06-F1P-250-P06-F
Automatic Float1″1P-120-M08-F1P-175-M08-F1P-250-M08-F1P-120-P08-F1P-175-P08-F1P-250-P08-F

*To add an indicator, add “i” to end of model number

Product Download

Download - 120/175/250 SCFM Spec Sheet

Specifications

Port Sizes1-1/4”, 1-1/2”, 2”
Thread StylesNPT, BSPT, BSPP
Flow Capacity300/400/700 scfm @ 100 PSI
Filter Capacity3.0 Micron & larger
Differential Pressure< 1.5 PSID at rated flow
Max Temp/Pressure Aluminum Bowl175°F/200 PSIG
Approx. Weight (lb.)30.0

Ordering Guide

Port SizeMetal Bowl
Low FlowMed FlowHigh Flow
Manual Brass Petcock1/2″1M-300-M10-P1M-400-M10-P1M-700-M10-P
Manual Brass Petcock3/4″1M-300-M12-P1M-400-M12-P1M-700-M12-P
Manual Brass Petcock1″1M-300-M16-P1M-400-M16-P1M-700-M16-P
Automatic Float1/2″1M-300-M10-F1M-400-M10-F1M-700-M10-F
Automatic Float3/4″1M-300-M12-F1M-400-M12-F1M-700-M12-F
Automatic Float1″1M-300-M16-F1M-400-M16-F1M-700-M16-F

*To add an indicator, add “i” to end of model number

Product Download

Download - 300/400/700 SCFM Spec Sheet

Specifications

Port Sizes3″
Thread StylesNPT, BSPT, BSPP
Flow Capacity1,200 SCFM @ 100 PSI
Filter Capacity3.0 Micron & larger
Differential Pressure< 1.5 PSID at rated flow
Max Temp/Pressure Aluminum Bowl175°F/200 PSIG (manual drain)
175°F/150 PSIG (float drain)
Approx. Weight (lb.)38.00

 Ordering Guide

Port SizeMetal Bowl
Manual Brass Petcock3″1M-1200-M24-P
Automatic Float Drain3″1M-1200-M24-F

*To add an indicator, add “i” to end of model number

Product Download

Download - 1,200 SCFM Spec Sheet

Specifications

Port Sizes3″, 4″, 6″ RFSO
ConnectionRaised Face 150# Flange
Flow Capacity2,500/5,500 SCFM @ 100 PSI
Filter Capacity3.0 Micron & larger
Differential Pressure< 1.5 PSID at rated flow
Max Temp/ Pressure Epoxy Coated Carbon Steel125°F/150 PSIG
Approx. Weight (lb.)300.0/310.0/450.0

 Ordering Guide

Port SizeMetal Bowl
Manual Brass Petcock3″1M-2500-MFD-P
Manual Brass Petcock4″1M-2500-MFE-P
Manual Brass Petcock6″1M-5500-MFF-P
Automatic Float3″1M-2500-MFD-X
Automatic Float4″1M-2500-MFE-X
Automatic Float6″1M-5500-MFF-X

*To add an indicator, add “i” to end of model number

Product Download

Download - 2,500/5,500 SCFM Spec Sheet

Similar Products

Eliminex High Flow Separators | Water & Dirt

Eliminizer Filter/Dryers | Water & Dirt

Eliminex High Flow Combo Units | Water, Dirt, Oil & Oil Vapor

High Pressure Filter Units

Oil Extractors | Water, Dirt, Oil, Oil Vapor & Odor

Food Grade Filter Units

Oil Extractor Combo Units | Water, Dirt, Oil, Oil Vapor & Odor

Stainless Steel Filter Units

Eliminizer Filter/Dryer Combo Units | Water, Dirt & Oil

Coalescers | Dirt & Oil

TOP

How can we help you?

Call (877) 602-0010 to skip the wait!

Get Quote Started