IQ Power System Static Neutralizing System
The IQ Power Static Neutralizing System and IQ Power HL for hazardous locations is an unparalleled lineup engineered with technology that combines complete monitoring intelligence with a user-friendly interface. It has been specially designed for use in rugged industrial applications and has many patented features including IQ Power, which provides exceptional ionization performance. As an added feature it is security enabled, configurable parameters allow the user to understand and control their static neutralization challenges through a user-friendly interface and microprocessor controlled touchscreen.
Download - IQ Power System Brochure
This fully integrated system makes installation a snap. No complicated software to install or maintain. There’s no need to figure out firewalls and installation issues, or which browser to use. The IQ Power System incorporates several relay output choices to suit desired alarm methods for streamlined operation and maximum productivity. Global relays, as well as individual IQ Power BPS relays, are accessible for both warning and fault user-selectable alarm thresholds.
Incorporating the latest in ionization technology, the IQ power control station is equipped with a full-color touch panel interface. The control station allows the user to configure global and localized settings for up to 10 devices and offers single point monitoring for each device. No power sources available? No problem, as the IQ Power Control Station can provide full power and communications for up to 6 neutralizing devices. The Control Station provides three Balance Modes of operation to manage the output polarity:
- Fixed Mode for system optimization based on average web conditions.
- Manual Mode for user adjusted output settings.
- Auto-Tune Mode a patent-pending feature for consistent live web reading and optimization based on current conditions.
Intelligent air ionization system. This static eliminator is available with Speed, Speed-T, Hybrid, or Distance static bars. The IQ Power and IQ Power HL Static Neutralizing System is an unparalleled lineup engineered with the technology that brings complete monitoring intelligence with a user friendly interface. Designed for use in rugged industrial applications and leveraging many patented features, the IQ Power provides exceptional ionization performance. Security enabled, configurable parameters allow the user to understand and control their static neutralization challenges through a user-friendly interface and microprocessor controlled touchscreen. This fully integrated system makes installation a snap. No complicated software to install or maintain. There’s no need for figure out firewalls and installation issues, or which browser to use. The IQ Power and IQ Power HL System incorporates several relay output choices to suit desired alarm methods for streamlined operation and maximum productivity. Global relays as well as individual IQ Power BPS relays are accessible for both warning and fault user selectable alarm thresholds. Three balance control modes allow the user to optimize the system to suit their application. The patented Auto-Tune mode optimizes the system through live reading of current web conditions. Fixed mode offers optimization through average web conditions, while Manual mode allows users to adjust output settings.
- Fixed Mode: consistent time & amplitude
- Auto-Tune Mode: dynamic time & amplitude
IQ POWER STATIC NEUTRALIZING BARS
The rugged IQ Power static bars are offered in over 85 different lengths of industrial-designed static bars that are available in four varieties to suit the application based on web speeds or operating distance.
- Speed bars are engineered to neutralize static charges on webs traveling up to 3,000 feet per minute and are mounted approximately 4" from the material to be neutralized. Operating at 7kV.
- Speed -T bars are the latest addition to our static bar lineup and feature tungsten emitters for long life. Operating at 7kV.
- Hybrid bars are designed for installations where the distance between the static bar and material to be neutralized changes during the process and up to 18" away. Operating at 9kV.
- Distance bars are specially engineered to provide powerful ionization for distances up to 30" from the web in applications where installing a static bar close to the web is not an option. Operating at 12kV.
All IQ Power static bars include rugged mounting hardware. The IQ Power bars include a unique connection design which enables the power supply to recognize the application requirement and automatically set the output power necessary for the installation. The full IQ Power System is also available and approved for hazardous location installations, Class 1, Div 1.
- Applications: Coating, Printing, Laminating
- Max material width: 750mm (30”)
- Max line speed: 250m/min (800ft/min)
- Material cleaning: Single or Double-sided, reel to reel
IQ POWER STATIC BAR
|Nominal Bar Length||300mm to 3960mm (11.8" to 156") Overall Length|
210mm to 3870mm (8.27" to 152") Effective Length
|Profile Dimensions||26mm W x 49mm H [1.00" W x 1.93" H]|
|Emitter Material||Proprietary alloy specially selected to extend life|
Tungsten (Speed-T bars only)
|IQ POWER POWER SUPPLY||IQ Power BPS|
|Input Power Rating||24 VDC, 1.5A from AC adapter|
|Output Voltage||+/-7kV "Speed Bar and Speed-T Bar"|
+/-9kV "Hybrid Bar"
+/-12kV "Distance Bar"
|Dimensions||202mm L x 123mm W x 106mm H [7.95" L x 4.85" W x 4.17" H]|
|High Voltage Connector||2 proprietary IQ Power static bar outlets|
The PerforMAX IQ HL is an intelligent air ionization system that enables the user to be in charge of static electricity. It is designed to efficiently neutralize electrostatic charges on films, paper non-wovens and fabric in web or sheet form. IQ Power HL & HLC Power Supply There are two power supply choices for the IQ Power HL System. Both power supplies are the heart of the IQ Power HL System because they not only provide the high voltage output power producing ionization, but they also process all of the system intelligence to maintain and communicate complete static control. Features include auto-calibration and dual-axis feedback control. Indicators on the HL power supply display system status, power, service status, and fault conditions. The HL power supply is approved for mounting outside the hazardous area, while the HLC power supply is approved for mounting inside classified hazardous locations. Through the use of the required remote display monitor you can calibrate with the touch of a button along with neutralizing all critical indicators such as service status and fault conditions.
|Input Power||24VDC, 1.5Afrom ACadapter|
|Output Voltage||+/- 7kV "Speed Bar and Speed-T Bar"|
+/- 9kV "Hybrid Bar"
|HL||202mm L x 123mm W x 106mm H [7.95" L x 4.84" W x 4.17" H]|
|HLC||388mmL x 235mm W x 159mm H [15.25"L x 9.25"W x6.25"H]|
|HL||1.94 kg [4.28 lbs.]|
|HLC||14.5 kg [32 lbs.]|
|Max. Operating Temp||43°C [110°F]|