Shelco Stainless Steel Filter Cartridge is the perfect choice for your high-temperature applications up to 500ºF and high differential pressures up to 60 PSI. Constructed out of 304L or 316L stainless steel producing excellent product compatibility. The SS series has a broad choice of gasket materials and end cap configurations allowing the SS series cartridges to be used in a wide variety of housings.
Produced in cylindrical or pleated media for extra cartridge life and offering the advantages of a truly cleanable and reusable cartridge. Overcome the temperature and compatibility limitations of fabric or synthetic fiber cartridges by replacing them with these stainless steel. Click the get a quote button to have a filtration specialist help you locate the perfect replacement filter.
Download – Stainless Steel Cartridge Brochure
Features:
- Available in 304L or 316L Construction and offers a wide range of compatibility with fluids and temperatures
- Many different gasket options to meet your specific requirements
- Micron ratings from 5 to 840 provides a full range of uses from accurate filtration to straining
- End cap configurations consist of DOE with gasketed ends, SOE with 222, 226 or NPT thread
- Pleated elements provide more surface area for longer life and more dirt holding capacity
- All welded construction gives these cartridges the highest mechanical strength available in a stainless cartridge
- Cleanable and reusable
- Pleated cartridges 100 microns and finer have a heavy more open support layer to prevent collapsing of the pleats
- Optional pleat protector available to prevent denting and damage to the pleated surface
Applications:
- High Temperature
- High Differential Pressure
- Potable Water
- Caustic Fluids
- Plating Solutions
- Electronics
- Wastewater
- Straining
- Chemical Solutions
- Corrosive Liquids and Gases
- Viscous Fluids
- Hydraulic Oil
Compatible Cartridge Housings
Single Cartridge Housings – Multi-Cartridge Housings – Membrane Filter Housings – FRP Housings – Lined & Coated Housings
Specifications & Operating Parameters
| Pore Sizes | 2, 5, 10, 20, 40, 75, 100, 120,150, 190, 230, 280, 370, 540, 840 microns |
| Nominal Lengths | 4 7/8″, 9 3/4″, 9 7/8″, 10″, 19 1/2″, 20″, 29 1/4″, 30″, 40″ |
| Diameters | Outside: 2 1/2″ (Cylindrical), 2 5/8″ (Pleated) Inside: 1 1/16″ |
| Gaskets/ O-rings | Buna, EPR, Teflon, Viton |
| Materials of Construction | 304L or 316L Stainless Steel |
| Maximum Temperature | 500˚F (260˚C) |
| Maximum Change-out Differential Pressure | 60 psid (4.2 bar) |
| End Cap Configurations | DOE, 222/flat, 226/flat, 1″ MNPT, 1″ FNPT |
| Options | Pleat protector to prevent denting and damage to surface Heavy duty core (300 psi) |
Ordering Guide
| Product Code | Length | Micron | Style | End Cap Configuration | Gasket/O-Ring | Options | Material |
| SS | 5 = 4 7/8″ 975 = 9 3/4″ 978 = 9 7/8″ 10 = 10″ 195 = 19.5″ 20 = 20″ 295 = 29.25″ 30 = 30″ 40 = 40″ |
2 5 10 20 40 75 100 120 150 190 230 280 370 540 840 |
C = Cylindrical P = Pleated |
S1 = DOE S4 = 222 w/ Flat End S6 = 226 w/ Flat End 1M = 1″ MNPT 1F = 1″ FNPT |
B = Buna E = EPR T = Teflon V = Viton |
Blank = None PL = Pleat Protector HD = Heavy Duty Core (300 psi) |
304 = 304L 316 = 316L |
