Fil-Trek Pleated Gas Cartridge Filters

Fil-Trek Gas Cartridge Filter HCS SeriesPleated Gas Cartridge Filters

The HCS synthetic media cartridges are comprised of pleated polyester media. Available in a wide variety of lengths and diameters, these filters are well suited in water based, chemical and petroleum based fluids. End caps and centre cores are made of tin plated steel along with Buna-N gaskets. These HCS cartridges are also wrapped in an outer perforated plated steel jacket and are available in micron ratings from 0.5 to 40.

Features:

  • Pleated synthetic cartridges available in various configurations and sizes.
  • HCS series elements range from 80 to 99% removal efficiency.
  • Plated steel end caps and core help protect the element.
  • Available in micron ratings from 0.5 to 40.
  • Synthetic material allows for a longer life then with a pleated paper element.
  • Spiral formed, plated steel centre cores are standard to prevent cartridge collapse at high differential pressures.
  • Elements come standard with Buna-N gaskets with others available.
  • Can be used to replace other manufacturers cartridges.

Download - HCS Series Data Sheet

Compatible Housings - Gas/Oil Filter Cartridge Housings

Fil-Trek Pleated Gas Cartridge Filter HCG SeriesFil-Trek Pleated Gas Filter HCS Series

HCG cartridges are your high efficiency pleated filters that are made up of special resin impregnated cellulose and micro glass fibers. This combination of the two materials ensures consistent high flow rates and efficient filtration every time. These pleated filters are best used in water, chemical and petroleum based fluid applications.

With such a high glass content present, this assists in protecting the filter against swelling and deterioration which can be a problem when using cellulose based filters. Both the center core and end caps are made of tin plated steel and Buna-N gaskets are standard.

Features:

  • Pleated cellulose/glass cartridges available in a variety of configurations
  • Effective removal at 96.67%(Beta 30) efficiency from 1 micron nominal and at 98.67%(Beta 75) efficiency from 3 microns absolute.
  • Plated steel end caps and core help protect the element.
  • Element uses phenolic resin impregnated cellulose & microglass fibers.
  • Spiral formed, plated steel center cores are standard to prevent cartridge collapse at high differential pressures.
  • Elements come standard with Buna-N gaskets with others available.
  • Can be used to replace other manufacturers elements.

Download - HCG Series Data Sheet

Compatible Housings - Gas/Oil Filter Cartridge Housings

Fil-Trek Gas Cartridge Filter HC Series

Fil TrekGasFilterHCSSeries
HC cartridges are made of special resin impregnated cellulose and are best used for the removal of particulate where a nominally rated filtration efficiency is suitable. The large surface area of these pleated cartridges maximize dirt holding capacity and are stable under high flow rate applications.

The flow direction of the HC filters is outside to inside, however reverse flow filters are available (please contact factory if reverse flow is needed). The cores, end caps and outside wrapper are made of tin plated steel and Buna-N gaskets are standard.

Features:

  • Pleated cellulose cartridges available in various configurations.
  • HC series nominal elements range from 90 to 95% removal efficiency,
  • Plated steel end caps and core help protect the element from bursting into the system.
  • Available in micron ratings from ½ to 40.
  • Spiral formed, plated steel center cores are standard to prevent cartridge collapse at high differential pressures.
  • Elements come standard with Buna-N gaskets with others available.
  • Can be used as replacements for other manufacturers elements.

Download - HC Series Data Sheet

Compatible Housings - Gas/Oil Filter Cartridge Housings

Fil-Trek Gas Cartridge Filter Aquasorb Series

Fil TrekGasFilterHCSSeries

The Aquasorb Series cartridge filters are best used for the removal of particulate from a variety of petroleum products.

These are designed to absorb water where it may harmful to a specific application. On average a AQ718 cartridge is capable of retaining between 1-3 quarts of water (depending on flow rate, viscosity and inlet water concentration).

Features:

  • AQ filter allows for high flow rates with a low pressure drop.
  • Plated steel end caps and core help protect the element from collapsing at high differential pressures.
  • Media constructed of special resin impregnated cellulose and water absorbing media.
  • External steel wrap protects pleats from deforming during high flow rates.
  • Available in micron ratings from 0.5 to 25.
  • Effectively used, for applications where water damage is a serious concern for equipment down the line.
  • Elements come standard with Buna-N gaskets with other options available.

Compatible Housings - Gas/Oil Filter Cartridge Housings

TOP

How can we help you?

Call (877) 602-0010 to skip the wait!

Get Quote Started