Home » Liquid Filtration » Cartridge Housings » Multi-Cartridge Housings » 4 and 5 Multi-Cartridge Housings

Multi-Cartridge Filter Housings 4FOS and 5FOS

We carry a complete line of Shelco four and five round models of multi-cartridge housings to accommodate a wide range of flow rates. Options include 304L or 316L stainless steel with band clamp, or swing bolt closure. Designed to handle pressure up to 150psi (10bar) @ 300ºF (149ºC). These cartridge filter housings offer a wide range of flow capacities and contaminant holding capabilities.

Equipped with standard inlet and outlet connections and many other options available, multi-cartridge housings are constructed with heavy duty stainless steel and a standard poly-coat finish, other options can be special ordered. Standard gasket is FDA grade Buna-N.

DownloadMulti-Cartridge Housings – 4FOS and 5FOS BrochureMulti-Cartridge-Housings-4FOS-5FOS

Features:

  • Designed for industrial and commercial filtration needs
  • 304L standard and 316L stainless steel available.
  • Pipe fittings readily accessible for easy installation
  • Knife edge seal at both cartridge ends to eliminate by-pass
  • Standard housings accept double-open-end cartridges
  • Available with 222 or 226 cartridge adapters
  • Complete selection of pipe fittings: flanged, sanitary, BSP, grooved and others
  • See Ordering guide for complete list of options

Compatible Filters

String Wound Filter Cartridges - Melt Blown Depth Cartridges - ME Series Pleated Cartridges
High Efficiency Pleated Cartridges - Carbon Filter Cartridges - Stainless Steel Cartridges

Specifications

Maximum Operating Pressure150 psig (10.3 bar) @ 300°F (149°C)
Inlet and Outlet ConnectionsInlet /Outlet: 2" MNPT
Drain Ports: 1/2" FNPT
Vent Ports: 1/4" FNPT
Optional: MNPT, FNPT and BSP fittings, RF flanges, Sanitary ferrules and Grooved fittings
Materials of ConstructionHead and Shell: 304L or 316L Stainless Steel
Connections: 304L or 316L Stainless Steel
Closure: Clamp: 304L Stainless steel; Swing Bolts: Zinc Plated Steel
Vent and Drain Plugs: 304L or 316L Stainless Steel
GasketsBuna N (FDA Grade)
Optional: EPR, Silicone, Viton or Teflon Encapsulated Silicone
FinishPoly-coat on exterior surfaces
Optional: Electro-polish, Glass bead or Passivate
Cartridge TypeDOE style cartridges (maximum 2 3/4" OD)
Optional: 222 and 226 adapters
Custom Options- Gauge Ports or Gauge Ports with Pressure Gauges
- Mounting Tabs, Mounting Legs or Heavy Duty Mounting Legs

Ordering Guide (Example: 4FOS3SB-316-226-2MNPT-ML-B)

ModelCartridge LengthClosure StyleMaterialCartridge ConfigurationConn. SizeConnection TypeOptionsGasket
4FOS3SB3162262MNPTMLB
4FOS
5FOS
1 = 1 High
2 = 2 High
3 = 3 High
4 = 4 High
C = Clamp
SB = Swing Bolt
304 = 304L
316 = 316L
Blank = DOE Cartridges
222 = 222 Fin/Flat Style Cartridges
226 = 226 Fin/Flat Style Cartridges
2
1.5
MNPT = Male Pipe Thread
FNPT = Female Couplings+
BSPT = BSP Tapered+
BSPP = BSP Parallel+
F = Flange
TC = Ferrules
GF = Grooved Fittings
TABS = Mounting Tabs
ML = Mounting Legs
OL = Heavy Duty Legs
GP = Gauge Ports
GPA = Gauge ports with Gauges
EP = Electropolished
GB = Glass Bead
P = Passivate
B = Buna N
E = EPR
S = Silicone
V = Viton
TS = Teflon Encapsulated Silicone
TOP

How can we help you?

Call (877) 602-0010 to skip the wait!

Get Quote Started