Product Specifications
Typical Specifications: Furnish and install Electric Forced Air Heaters where specified. The heaters shall be constructed
of a heavy gauge steel housing. The rough-in dimensions are 14 ?” Wide x 19-1/2″ High x 4″ Deep. The finish shall be
powder coated paint in ivory or white color. The units shall be available in ratings from 750 through 4800 Watts. The
heaters shall have a low speed 600 RPM motor which drives a vane axial blower to deliver a quiet 175 CFM of down
flow air. The heating element shall be of the sealed block fin type with large, parallel steel fins for quick heat transfer.
Unit shall have a standard thermal overload cutoff for added safety, a fan switch for fan only operation, and is available
with a single pole, or double pole built-in thermostat, or no thermostat. The in-built thermostat shall be calibrated
to provide a range of 0 degrees F. to 110 degrees F. All heaters shall be listed by ETL. The heating element shall be
supplied with a manufacturer’s 1 year limited warranty.
Features
- Powder coated 18 gauge steel front
- Automatic reset thermal limit
- Steel block fin element
- Made in U.S.A.
- Vane axial fan blade: 600 RPM / 175 CFM
- Units with dual wattage, factory wired to highest wattage
- Wattage selectable at time of installation on some models
MODELS WITH IN-BUILT SINGLE POLE THERMOSTAT – White
Reviews
There are no reviews yet.