Shelco Filters has created the MicroSentry wound cartridge, setting a higher standard for industries requiring cartridge filtration. Our equipment makes achieving precision patterns a matter of standard procedure. Our state of the art computerized production machinery takes the variables out of custom winding, and enables us to produce filter cartridges that are accurately wound from a single strand of specially selected fibrous roving material, wound around a perforated core in a nearly perfect geometric pattern.
MicroSentry wound cartridges can be produced from a wide range of materials. With a range of 0.5-150 microns filtration, depending on your requirement for removal of solids from liquids, compressed air or gases. The MicroSentry Cartridges are independently tested to have the highest efficiencies in the industry.
Download – String Wound Filter Cartridge Brochure
Applications:
- Oils
- Photo Solutions
- Food and Beverage
- Chemicals
- Petro Chemical
- Process Water
- Pre-Filtration
- Waste Water
- Air and Gas
- Magnetic Coatings
- Solvents
- Paint/Ink
Specifications & Operating Parameters
| Pore Sizes | 0.5, 1, 3, 5, 10, 20, 25, 30, 50, 75, 100, 150 microns |
| Nominal Lengths | 4 3/4″, 4 7/8″, 9 3/4″, 9 7/8″, 10″, 19 1/2″, 20″, 29 1/4″, 30″, 39″, 40″ |
| Outside Diameters | 2″, 2 3/8″, 2 1/2″, 2 3/4″, 4 1/2″ |
| Inside Diameter | 1″ |
| Materials of Construction | Filter Media: Fibrillated Polypropylene FDA Polypropylene, Industrial Polypropylene, Natural Cotton, FDA Bleached Cotton, Industrial Bleached Cotton, Polyester, Glass Fiber, Nylon, Rayon Core: Polypropylene, 304 Stainless Steel, 316 Stainless Steel, Tin Steel |
| Recommended Change-out Differential Pressure | 20 psid (1.4 bar) |
| FDA and USP Compliance | FDA Bleached Cotton and FDA Polypropylene filters are manufactured of materials that comply with FDA requirements for food contact per CFR Title 21 |
Ordering Guide
| Product Code | Length | Media | Core | Micron | Core Cover | Diameter | End Cap Configuration |
| MS | 47 = 4 3/4″ 5 = 4 7/8″ 97 = 9 3/4″ 98 = 9 7/8″ 10 = 10″ 195 = 19.5″ 20 = 20″ 294 = 29.25″ 30 = 30″ 40 = 40″ |
B = Fribilated Polypropylene C = FDA Bleached Cotton E = Polyester F = FDA Polypropylene G = Glass Fiber N = Nylon P = Industrial Polypropylene R = Rayon U = Natural Cotton W = Industrial Bleached Cotton |
P = Polypropylene S = 304 Stainless Steel G = 316 Stainless Steel T = Tin Steel |
0.5 1 3 5 10 20 25 30 50 |
Blank = None N = Non Woven W = Woven |
Blank = 2.5″ 45 = 4.5″+ 2 = 2″ 3 = 2 3/8″ 4 = 2 3/4″ |
Blank = None S1 = DOE w/ Gasket S3 = 222 w/ Fin End S4 = 222 w/ Flat End S5 = 226 w/ Fin End S6 = 226 w/ Flat End S8 = SOE w/Spring S12 = 222 w/ spring F = Fin End Only FL = Flat End Only EXP = PP Extended Core EXS = SS Extended Core |
+ Available without end cap
