Mark I
The Mark I Web and Sheet Cleaning Dust Collector System includes brushes and static control bars before and after the vacuum slot. Removal of dust and dirt improves production speeds and lowers the incidence of product quality defects.
An Ion-O-Vac is is normally mounted where material has more than 30 degrees of surface contact with a roller or cylinder. This maximizes the cleaning effect of the high pressure vacuum. The collector must be located in close proximity to the heads.
- Single or double sided web cleaning
- Contact and non-contact configurations
- Brackets and ducting included
- Adjustments for precisely positioning the hood over the substrate
- Optional pneumatic retraction systems to raise and lower the hood
- Brushes slide in and out for easy replacement
Mark IV
Ion-O-Vac Mark IV Sheet Cleaning Systems utilize the power of rotary brush action to scrub the material surface, cleaning down to 15-microns. The scrubbing action of the Mark IV rotary brush is designed for the toughest of materials that demand the cleanest of surfaces.
Standard features include a canister collector with cartridge filter, pre-filter and motor starter, Ion-O-Vac hood with rotary brush, drive motor and speed control, static eliminator and brackets. Systems can be configured to clean one or both sides of the material.
Ion-O-Vac Systems are custom designed for each application.
Neutro Vac
Neutro Vac vacuum cleaners keep your web or sheet free of contaminants down to 20-microns in size. Neutro-Vac systems combine the power of a compressed air blast, static elimination, brushes and a high exhaust head to agitate the web, remove the static bond and evacuate surface particulate down to 20 microns in size. The Neutro-Vac systems are ideal for installation over unsupported webs from 3” to 300” wide. Neutro-Vac Systems are custom designed for each application.
- One sided or top and bottom web cleaning
- Contact, non-contact and hazardous location configurations
- HEPA after-filter available
Download – Vacuums Brochure
