Dependability of high quality equipment is vital in every industry, so is working with equipment that can save both time and money. The combination air compressor, generator, and arc welder is the ideal tool for field repairs in remote locations. Save room on your service truck with this versatile all-in-one solution.
Battery and battery cables not included.
Receiver tank not included: base-mount model.
Features:
- Generator Mode: AC current only – Selector switch set to idle down – Switch is set to full throttle
- Welder Mode: DC current only – Engine must be running full throttle – Selector switch must be set to full throttle
- Compressor Pump: Splash lubricated – Stainless-steel braided discharge hose – Large canister intake filter – Oil level sight indicator
- Generator: Brush-type 2 pole 120V/240V alternator – Total harmonic distortion (THD) less than 6% – 100% copper windings
- Welder: Amperage selection switch, 170A maximum
- Frame: 16-gauge powder coated belt guard
- Components: Regulator and two gauges for tank and outlet pressure – Manual drain valves for proper maintenance – 16.5-inch fly wheel
- Equipped with 150-PSI maximum rated regulator
Specifications:
- Displacement/ Engine: 420cc Mi-T-M OHV with Electric Start – Battery and Battery Cables Not Included
- Rated Speed: 3600 RPM
- CFM @ 90 PSI: 16.4
- Compressor: Two Stage, Cast Iron
- Tank Size: Not Applicable – Base-Mount Model
- Max. AC Output: 5000 watts
- Rated AC Output: 4500 watts
- Alternator Wattage: Cont. On-Load @ 90 PSI: 3000 watts
- Frequency/Voltage: 60Hz/120V/240V
- Max. Amps (120V/240V): 41.5/20.8
- Cont. Amps (120V/240V): 37.5/18.8
- Receptacles: (2) 120V, 20A GFCI Duplex; (1) 120V/240V, 20A Twist Lock
- Duty Cycle (10 Min. Run Time): 150A @ 100%
- DC Voltage: 50-170A Working Range
- Fuel Tank: 1.85 gallon
Weights & Dimensions:
- Net Weight: 384.00 lbs.
- Shipping Weight: 449.00 lbs.
- Length: 49.00 in.
- Width: 22.00 in.
- Height: 28.50 in.
