JL W Centrifugal Separators

Item # LF-JLWCS Brand: JL Wingert

Request Quote

Expert Assistance, Volume Discounts, and OEM Pricing

Our application specialists are ready to help!

Description:

The power of centrifugal force has been used to separate solids from liquids for over a century. Centrifugal separators are designed to take full advantage of this technology, while acting as a highly efficient solid-liquid separation tool.

Centrifugal Separators have no screens, slotted baffles, moving parts or filter media to cause unnecessary pressure loss or use of large volumes of backwash water. No maintenance is required, however, a periodic opening of the purge valve is necessary to dispose of unwanted solids.

How They Work:

The system’s influent passes through the separator in a high-velocity circular motion.

Centrifugal force slings the particulates, sand, debris, and sludge outward to the separator wall and downward in a spiral motion. Gravitational force pulls the separated solid particles downward past the spin trap plate into the solids holding chamber.

The cleansed effluent then rises through the vortex locator and returns back to the system.

Purging can be done manually or automatically through the use of a purge package. The lack of moving parts means there is little to no maintenance required.

Features:

  • Flow rates from 8 – 13,000 GPM
  • Model sizes ranging from 1/2″ – 20″
  • 150 psi at 200° F max (1055 kPa at 93° C), higher ratings available
  • 150 lb. ANSI RF/SO flanged or National Pipe Thread, others available upon request
  • Carbon steel or stainless steel, consult factory for other requirements
  • No routine maintenance or parts replacement, simple periodic solids purging only
  • Up to 80% less space required than conventional filtration equipment
  • Selection, sizing, custom designs and systems and installation guidance available
  • Options Include:
    • Space saving designs
    • High temperature and pressure
    • Special coatings
    • Low profile (4″ – 20″ models)
    • Wall mounting brackets (1/2″ – 3″ models)
    • Removable legs (1/2″ – 3″ models)
    • Clean-out (4″ x 6″ door / 2″ FNPT plug)
    • Internal inspection access
    • Removable purge chamber
    • Automatic, manual & continuous purge packages

Performance:

Centrifugal Separators can remove up to 98% of the particles which are 363 mesh / 40 microns, and 1.8 specific gravity or greater. Particles with less than 1.8 specific gravity and smaller than 40 microns may be removed with greater effectiveness from liquids with a specific gravity less than water.

Available Models:

Model Sizes Weight End Connection Pressure Temperature Spec Sheet
XTI-1 3″ 51 lbs Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XTI-2 1/2″ to 2-1/2″ 11 – 32 lbs Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XGD-1 3″ 53 lbs Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XGD-2 1/2″ to 2-1/2″ 11 – 34 lbs. Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XFT-1 3″ 70 lbs Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XFT-2 1/2″ to 2-1/2″ 13 – 49 lbs. Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
XFD-1 4″ to 20″ 159 – 2464 lbs. Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
RTE-1 3″ 198 lbs. Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
RTE-2 1/2″ to 2-1/2″ 57 – 133 lbs. Threaded 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
RFR-1 4″ to 20″ 220 – 3036 lbs. Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
RFL-1 3″ 222 lbs. Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF
RFL-2 1/2″ to 2-1/2″ 59 – 149 lbs. Flanged 150 PSI (10.3 bar) max 200º F (93º C) max  PDF

Available Series:

Solid/Liquid Criteria Range:

Particle Size > 40 micron up to 1 3/4″, consult factory for other requirements
Pressure Drop Minimum 4 psi with little to no fluctuations
Flow Range 8 gpm to 13,953 gpm – higher & variable flow rates possible through manifolding
Fluid Loss Minimal fluid loss achieved with a continuous recovery system

Download – Centrifugal Separators Brochure

Additional information

Brand JL Wingert
Weight 1 lbs