With the most complete line of pleated filter cartridges, Shelco offers the most economical high-efficiency pleated elements available. For your most critical throughput, the MH Series is the best solution to your filtration problems. The cartridge is made of pleated polypropylene media and has verified efficiencies of 99.98% at the rated micron. With more than 5½ square feet of media, this cartridge will last longer and has a higher dirt holding capacity than any other cartridge available.
With standard lengths to fit most housings, these cartridges are the perfect choice when the economy and efficiency are critical. ISC’s line of high-efficiency cartridge filters are guaranteed to optimize throughput, reduce costs and achieve absolute and repeatable effluent quality.
Download – High Efficiency Pleated Cartridge Brochure
Features:
- Micron ratings from 0.2 to 50 microns
- Micron removal efficiency ratings at 99.98%
- Meets the requirements of the FDA for food and beverage applications
- More surface area, more pleats, and more media offer higher dirt holding capacities
- Polypropylene construction offers a wide range of chemical compatibility
- Fixed pore construction allows for higher dirt holding capacity without unloading as the differential pressure increases
- 5.5 Square feet of media
Applications:
- RO Prefilters
- Cosmetics
- Ultrapure water
- Food & Beverage
- Electronics
- Photographic & Chemical solutions
- Potable Water
- Waste Water
- DI Water Pre-Filtration
- Solvents
FDA Compliance:
Shelco MicroSentry High-Efficiency Cartridges are manufactured of pure polypropylene materials with no additives or other manufacturing agents. Shelco certifies that all materials used in the production of these cartridges meet the requirements of FDA Title 21 of The Code of Federal Regulations 147.5 and 177.1520.
Compatible Cartridge Housings
Single Cartridge Housings – Multi-Cartridge Housings – Membrane Filter Housings – FRP Housings – Lined & Coated Housings
Product Code | Micron | Length | End Cap Configuration | Gasket/O-Ring |
MHP – Polypropylene | 0.2 0.45 1.0 3.0 5.0 10.0 25.0 50.0 |
975 10 20 30 40 |
S1 = DOE w/Flat Gaskets S3 = 222 w/Fin End S4 = 222 w/Flat End S5 = 226 w/Fin End S6 = 226 w/Flat End |
B = Buna-N E = Ethylene Propylene S = Silicone V = Viton T = Teflon Encapsulated Silicone |