Whether you are using it in a garage or on the jobsite, this 210,000 BTU Forced Air Kerosene heater by Heatstar is up for the task. With jobsite ready dual powder coated tubular steel handles, pneumatic rubber tires and a split upper shell designed for maintenance, you can expect long life and faithful service from your Heatstar Forced Air Kerosene Heater. Equipped with a high output fully enclosed motor and large glove friendly controls, you cannot go wrong, Heating up 6,000 square feet and controlled by a factory installed thermostat, this unit effortlessly heats up a lot of space quickly. Equipped with a high limit safety switch and a photo CAD cell to shut the unit off in unsafe conditions, you can use this heater with no worries and focus on the task at hand. This kerosene heater has all the versatility and safety features the jobsite requires.
Features:
- 210,000 BTU per hour
- For use with kerosene 1 and 2, diesel 1 and 2, home heating oil and JP-8
- Heats up to 6,000 sq. ft.
- Operates approximately 9 1/2 hours on full tank
- Overheat safety shutdown
- Fuel Gauge
- Continuous ignition
- Heavy Construction
- Enclosed motor
- Thermostat for temperature control
Specifications
| Weight (lbs.) | 60.55 |
|---|---|
| BTU per Hour | 210000 |
| Fuel Type | kerosene 1 and 2, diesel 1 and 2, home heating oil and JP-8 |
| Tank Capacity (Gal) | 14 |
| Ignition | Continuous |
| Electrical Rating | 115 V / 20 AMPS |
| Air Volume (CFM) | 400 |
| Heated Fuel Filter | No |
| Heated Nozzle | No |
| Clearance to Combustibles: Horizontal | Outlet 8ft; Top, Back, and Sides 3ft |
| Wheel Type | Solid Rubber |
| Thermostat Optional | Yes |
| Carton Length (in) | 18.25 |
| Carton Width (in) | 39.75 |
| Carton Height (in) | 21 |
| Carton Weight (in) | 71 |
| Warranty | 1 Year Limited |
| Model | HS210KT |
