The CSK 060 is a touch-safe PTC heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design.
Moisture can build up not only in outdoor or poorly insulated enclosures but also in highly protected and well-sealed enclosures. ISC’s wide variety of heaters prevent moisture from harming sensitive equipment.
Features:
- Low surface temperature
- Compact size
- Wide voltage range
- Double insulated protection
- DIN rail mountable
| Heating element | PTC resistor – temperature limiting |
| Surface temperature | < 185 ℉ (85 ℃), except upper protective grill |
| Connection | 2-pole terminal AWG 14 max. (2.5 mm2), torque 0.8 Nm max. |
| Mounting | clip for 35 mm DIN rail, EN 60715 |
| Housing | plastic, UL 94V-0, black |
| Mounting position | vertical |
| Operating / Storage temperature | -49 to +158 ℉ (-45 to +70 ℃) |
| Operating / Storage humidity | max. 90 %RH (non-condensing) |
| Dimensions | 3.86″ x 2.95″ x 1.5″ (98 x 75 x 38 mm) |
| Protection class / Protection type | II (double insulated) / IP20 |
| Approvals | UL File No. E150057, VDE, GOST TR |
| Note | other voltages available upon request |
