Explosion-Proof-Heater-CREx-020

Enclosure Heater – Explosion-Proof Heater – Class T5 – CREx 020

Explosion-Proof Heater CREx 020 | 50 & 100W

Enclosure Heater – Explosion-Proof Heater – Class T5 – CREx 020

$0.00

In stock
Item # CREX020-T5-ST Brand: Stego

$0.00

Maintenance-Free

Clear
SKU: CREX020-T5-ST Brand:
  • Description
  • Additional information

Description

The Explosion-Proof Heater CREx 020 use convection and are perfect for use in areas with explosion hazards. These heaters can maintain minimum operating temperatures and help prevent the failure of electronic components caused by condensation and corrosion.

ISC’s enclosure heaters warm the air inside enclosures, preventing water vapor from condensing on components while providing the greatest possible air circulation with low energy consumption. Explosion-proof heaters are available from ISC and are compatible with special considerations like auto-ignition points in hazardous environments.

Features:

  • Large convection surface
  • Maintenance free
  • DIN rail mountable
Temperature Class T5
Ex Protection type II 2 GD, Gases, Dusts Ex db IIC T5 Gb, Ex tb IIIC T100 ℃ Db IP66
Ambient temperature -76 to +122 ℉ (-60 to +50 ℃)
Surface Temperature max. +212 ℉ (+100 ℃)
Heating Element High Performance Cartridge
Heating Body Aluminum Profile, Silver Anodized
Connection silicone cable (halogen-free) 3 x AWG 18 (0.75 mm2), length 3 ft (1 m)
Connection PE AWG 18 to 14 (0.75 to 2.5 mm2)
Mounting clip for 35 mm DIN rail, EN 60715 for heating body size – 4.7 x 2.4″; screw mounting with 2 mounting brackets for all heating body sizes, optional sideways mounting
Mounting Position Vertical Airflow (connection at bottom)
Storage Temperature -76 to +185 ℉ (-60 to +85 ℃)
Operating / Storage humidity max. 90 % RH (non-condensing)
Protection type / Protection class IP66 / I (grounded)
Approvals EPS 16 ATEX 1 109 X; IECEx EPS 16.0048X; EAC

Downloads:

Explosion-Proof Heater T5 CREx 020 Brochure

Additional information

Weight 1 lbs
Heating Capacity

50 W, 100 W

Operating Voltage

120 V, 230 V

Dimensions

4.7 x 2.4 x 7.1", 6.3 x 3.2 x 11.8"

Hole Spacing X

8.9", 13.8"

Pre-Fuse Time Delay

0.5 A, 1 A, 2 A

Mounting

Din Clip Mount, Screw Mounting Bracket

Brand

Stego

Variations
SKUDetail
02051.0-00Heating Capacity: 50 WOperating Voltage: 230 VDimensions: 4.7 x 2.4 x 7.1"Hole Spacing X: 8.9"Pre-Fuse Time Delay: 0.5 AMounting: Din Clip Mount
02051.9-00Heating Capacity: 50 WOperating Voltage: 120 VDimensions: 4.7 x 2.4 x 7.1"Hole Spacing X: 8.9"Pre-Fuse Time Delay: 1 AMounting: Din Clip Mount
02051.0-10Heating Capacity: 50 WOperating Voltage: 230 VDimensions: 4.7 x 2.4 x 7.1"Hole Spacing X: 8.9"Pre-Fuse Time Delay: 0.5 AMounting: Screw Mounting Bracket
02051.9-10Heating Capacity: 50 WOperating Voltage: 120 VDimensions: 4.7 x 2.4 x 7.1"Hole Spacing X: 8.9"Pre-Fuse Time Delay: 1 AMounting: Screw Mounting Bracket
02052.0-10Heating Capacity: 100 WOperating Voltage: 230 VDimensions: 6.3 x 3.2 x 11.8"Hole Spacing X: 13.8"Pre-Fuse Time Delay: 1 AMounting: Screw Mounting Bracket
02052.9-10Heating Capacity: 100 WOperating Voltage: 120 VDimensions: 6.3 x 3.2 x 11.8"Hole Spacing X: 13.8"Pre-Fuse Time Delay: 2 AMounting: Screw Mounting Bracket
Quick Quote
Or call (866) 487-8048 for immediate help.
Quick Quote
Chat