- One design, three flow rate variants to support your design requirements
- Anodized aluminum with an optional stainless steel cap
- Universal mounting
Product Description | ||
---|---|---|
5500 series purge and pressurization system vent |
General specifications | ||
---|---|---|
Series | 5500 | |
Hazardous environment | gas or dust | |
Pneumatic parameters | ||
Protective gas supply | instrument grade air or inert gas | |
Maximum pressure | depends on the integrity of the enclosure (strength) | |
Purge flow rate | See graphs | |
Flow rate for leakage compensation | EPV-5500….-01: approx. 21 scfh (593 l/hr) @ 0.25″ w.c. (0.63 mbar) approx. 58 scfh (1640 l/hr) @ 0.75″ w.c. (1.9 mbar) EPV-5500….-02: approx. 14 scfh (395 l/hr) @ 0.25″ w.c. (0.63 mbar) approx. 34 scfh (961 l/hr) @ 0.75″ w.c. (1.9 mbar) EPV-5500….-03: approx. 9.2 scfh (260 l/hr) @ 0.25″ w.c. (0.63 mbar) approx. 22 scfh (622 l/hr) @ 0.75″ w.c. (1.9 mbar) |
|
Breaking pressure | EPV-5500….-01: 0.8″ w.c. (2.0 mbar) EPV-5500….-02: 1.4″ w.c. (3.5 mbar) EPV-5500….-03: 1.5″ w.c. (3.8 mbar) |
|
Conformity | ||
Degree of protection | EN 60529 | |
Shock resistance | EN 60068-2 | |
Ambient conditions | ||
Ambient temperature | -20 … 60 °C (-4 … 140 °F) | |
Storage temperature | -20 … 60 °C (-4 … 140 °F) | |
Relative humidity | 5 … 90 %, non-condensing | |
Vibration resistance | 5 … 100 Hz , 1 g, 12 m/s2, all axes | |
Impact resistance | 30 g, 11 ms, all axes | |
Mechanical specifications | ||
Degree of protection | EPV-5500….-01/02: mounting only Type 4X EPV-5500….-03: Type 4X |
|
Material | ||
Housing | EPV-5500-AA… body and cap: 6061T6 aluminum EPV-5500-SS… body: 6061T6 aluminum, cap: 316L stainless steel |
|
Spark arrestor | 316L, (1.4404) stainless steel | |
Installation | – any orientation to enclosure – not gravity dependent – internal and external mounting possible |
|
Mass | approx. 1005 g (2.2 lb) | |
Dimensions | see dimensions | |
Mounting | mounting hole 1.5 in NPT knockout (50.8 mm) hole sealing nut (provided) | |
Data for application in connection with hazardous areas | ||
Directive conformity | ||
Directive 2014/34/EU | part of DEMKO 14 ATEX 1282X | |
International approvals | ||
UL approval | ||
cULus | UL File E184741 | |
IECEx approval | part of IECEx UL 14.0019X | |
General information | ||
Supplementary information | Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |