Standard White Baseboard Section – Hydronic & Architectural Electric Baseboard Heater Accessories
- The entire heater casing shall be constructed of 6063 extruded Aluminum. Minimum thickness of .100″ (12 gauge) Aluminum shall be
acceptable. Outlet grill shall cover entire length of air discharge opening and be constructed of steel. All casing and grill construction shall be
painted with high quality durable powder coated paint - The heating element shall be high quality nichrome wire encased in Magnesium Oxide and sealed in a stainless steel tube
- Linear automatic thermal limit shall extend the entire heater length of element and protect heater in case of an over-temperature condition
- Optional controls shall be mounted in junction box enclosures at either end of heater. Optional integral thermostat shall be located in junction
box with adjustment knob or for tamper-proof operation. Optional disconnect switch shall be mounted in junction box. Optional 120 Volt or air
conditioning receptacle shall be mounted in junction box - Optional installation accessories shall include inside and outside corner sections for complete wall perimeter fit. Profile of corners and grill shall
have appearance of heat sections for continuous architectural design. Corner accessories and heater sections shall be secured by alignment pins
for easy alignment of multiple heater applications
Reviews
There are no reviews yet.